All in one ‘make your own tempeh’ starter kit

Description

What is tempeh?

Tempeh is a well-known, nutritious, healthy and tasty fermented soybean cake from Indonesia. You make it from soy beans, but it also works well with other beans. In many cases the result is even tastier. Our tempeh starter is the original Indonesian variety with both Rhizopus Oligosporis and Rhizopus Oryzae fungi. Get started with making your own tempeh using this starterkit with a cool discount!

Content of the ‘make your own tempeh’ starter kit

• 25 grams of tempeh starter culture (enough for 15 kg!)
• 5 set of 50 mm plastic casings (perfect shape for your tempeh)
• 1 pricker (for punctering air holes in your casing)

How to make your own tempeh using our ‘make your own tempeh’ starter kit

Ingredients:

•  4 1/2  cups hulled soy beans (if using beans with the hulls intact, see below for extra steps)
•  2  tbsp. Vinegar
•  2 ½   tsp. tempeh starter culture

Steps to make your own tempeh:

1.  Soak the beans: place the beans in a large bowl of water with an extra 3 inches on top. Leave it over night or for at least 12 hours.
2.  Boil the soybeans for one hour or more to cook. If using a pressure cooker for about 45 min.
3. Dehull the beans by slowly rubbing the beans together in plenty water. The hulls will start to flow on top. Scoop them off.
4. Discard the cooking water and dry the beans (either using a towel to pat them dry or setting over low heat in the pot to evaporate the water off the beans). It is important for the beans to be dry to the touch, as too much moisture can ruin the batch.
5. Place the beans in a dry bowl and allow the beans to cool to skin temperature (appr. 37˚ C)
6. Add the vinegar and mix well. The vinegar provides protection against spoilage. Let dry some more.
7. Add the tempeh starter and mix well to evenly distribute the starter in the beans.
8. Place the beans in the provived casings, using a spoon. Make sure they are very thightly pressed together.
9. Puncture holes all around the casing with the pricker.
10. Close the casing, making sure it’s tight.
11. Incubate the beans at 25-35°C for 24-48 hours.
12. Check the beans after 12 hours. At this point in the process the fermentation will cause the beans to generate their own heat so you will normally need to reduce or even eliminate the external heat source. Be sure to use a thermometer to check the actual temperature (see below).
13. After 24 hours or so, the white mycelium will start to cover the surface of the beans. Over the next few hours the white mycelium will grow through the beans and will smell nutty.

Online tempeh making course